Immersion Heaters

Heating an acidic or caustic solution in an immersion application can be a difficult and often dangerous procedure. Dalton's Watt-Flex replaceable immersion system eliminates the complication of changing the heater and draining the tank.

Dalton Electric's Watt-Flex cartridge heater and immersion well system use a sheath with a welded endcap and NPT fitting that screw into the side of the tank. The sheath becomes a permanent part of the equipment. The cartridge heater is then inserted into this well and held in place with a flange. It can be removed and replaced with ease.

Clean and safe.

Heater never comes into contact with tank contents.

Easily replaced without draining the vat or tank. Watt-Flex heater contracts when de-energized for easy removal.

Stainless-steel sheath accommodates
standard diameter flanged Watt-Flex cartridge heaters from 5" to 72" lengths.

Solid Construction.
Stainless steel sheath with a welded end cap and NPT fitting that screws into and becomes a permanent part of the tank or vat to be heated.

 

Easy Heater Change Out.
The flanged Watt-Flex
cartridge heater is secured
to the NPT fitting with two screws.

 

To replace the immersion heater, simply remove the screws, and slide out the de-energized heater.

 

Immersion Heater Specifications

Both the Watt-Flex Cartridge Heaters and Immersion Heaters are manufactured to customer specified lengths. Please specify Overall Length of the Immersion Well (see drawing above).

Immersion Heater
 
Cartridge Heater
Sheath O.D.
NPT Fitting
Diameter
Length
(min-max)
5/8" 3/4" 1/2" 5" - 45"
7/8" 1" 3/4" 8" - 72"