When you need to find parts or replace your heater, choose Dalton Electric Heating Co., Inc. We make it easy for original equipment manufacturers (OEMs) to find replacement heaters by manufacturer, pump size, and electrical rating. Take a look through the information below.
Systems Our Platen Heaters Can Replace
Our Diff-Therm Platen Heaters have been specifically designed to work as replacements for the following systems:
Matching bolt patterns, casting shapes and sizes will ensure ease of installation. Superior design and meticulous construction will also ensure uniform heating, longer life, and efficient power generation.
Revolutionary Design
Our Dalton Diff-Therm Heaters are built with high-purity magnesium oxide, nickel chromium resistance wire, and stainless steel internal components. Special filling methods and equipment compact the magnesium oxide tightly inside and around the resistor helix, which is then swaged under 50 tons of pressure to its maximum possible density. The result is very high dielectric strength and efficient internal heat generation. Diff-Therm castings are machined to a smooth, flat finish to ensure efficient and uniform heat conduction into the boiler plate assembly for steady vaporization of the pump fluid.
To order a replacement heater, select the Dalton Diff-Therm heater below that matches your equipment.
Brands
CVC Products
Diff-Therm Platen Heaters are designed as direct replacements for CVC Products Vacuum Diffusion Pump heaters.
Matching bolt patterns, casting shapes and sizes ensure ease of installation. Superior design and meticulous construction ensure uniform heating, longer life, and efficient power generation.
Dalton Diff-Therm heaters are built with high-purity magnesium oxide, nickel chromium resistance wire, and stainless steel internal components. Special filling methods and equipment compact the magnesium oxide tightly inside and around the resistor helix which is then swaged under 50 tons of pressure to its maximum possible density. The result is very high dielectric strength and efficient internal heat generation. Diff-Therm castings are machined to a smooth, flat finish to ensure efficient and uniform heat conduction into the boiler plate assembly for steady vaporization of the pump fluid.
To order a replacement heater, select the Dalton Diff-Therm heater below that matches your CVC Products equipment.
Heater Replacement Guide: CVC Products | |||||||
PUMP
SIZE |
PUMP
MODEL |
Heaters
per Pump |
Electrical Rating
|
CVC PRODUCTS
PART NO. |
DALTON
PART NO. |
HEATER
TYPE |
|
WATTS
|
VOLTS
|
||||||
2"
|
PMC-2
|
1
|
300W
|
115V
|
65192
|
W3C040-0111
|
CARTRIDGE
|
2"
|
PMC-2
|
1
|
300W
|
208V
|
65192-2
|
W3C040-0110
|
CARTRIDGE
|
2"
|
PMC-2
|
1
|
300W
|
230V
|
65192-1
|
W3C040-0113
|
CARTRIDGE
|
2"
|
KS-200
|
1
|
500W
|
115V
|
51832
|
W4C044-0115
|
CARTRIDGE
|
4"
|
PMC-4
|
4
|
300W
|
115V
|
65192
|
W3C040-0111
|
CARTRIDGE
|
4"
|
PMC-4
|
4
|
300W
|
208V
|
65192-2
|
W3C040-0110
|
CARTRIDGE
|
4"
|
PMC-4
|
4
|
300W
|
230V
|
65192-1
|
W3C040-0113
|
CARTRIDGE
|
6"
|
PMC-6
|
6
|
300W
|
115V
|
65192
|
W3C040-0111
|
CARTRIDGE
|
6"
|
PMC-6
|
6
|
300W
|
208V
|
65192-2
|
W3C040-0110
|
CARTRIDGE
|
6"
|
PMC-6
|
6
|
300W
|
230V
|
65192-1
|
W3C040-0113
|
CARTRIDGE
|
6"
|
PVMS-10
|
1
|
2200W
|
230V
|
285801-2
|
2223-6/5D
|
PLATEN
|
10"
|
PMC-10
|
18
|
250W
|
208V
|
270819-0002
|
W3C034-0114
|
CARTRIDGE
|
10"
|
PMC-10
|
18
|
250W
|
230V
|
270819
|
W3C034-0112
|
CARTRIDGE
|
10"
|
PVMS-11, -12
|
1
|
5000W
|
230V
|
281463-1
|
5023-10/9D
|
PLATEN
|
10"
|
PVMS-11, -12
|
1
|
5000W
|
460V
|
281463-2
|
5046-10/9D
|
PLATEN
|
16"
|
PVM-16
|
6
|
1600W
|
230V
|
281760-2
|
1623-8/2R
|
PLATEN
|
20"
|
PVM-20
|
36
|
350W
|
115V
|
5507892-0001
|
3/512-2/9D
|
PLATEN
|
20"
|
PMC-20C
|
INNER
|
4310W
|
230V
|
269933-1
|
4323-12/3RI
|
RING*
|
20"
|
PMC-20C
|
INNER
|
4310W
|
460V
|
269933-3/5
|
4346-12/3RI
|
RING*
|
20"
|
PMC-20C
|
OUTER
|
6690W
|
230V
|
269933-2
|
6723-17/7RI
|
RING*
|
20"
|
PMC-20C
|
OUTER
|
6690W
|
460V
|
269933-4/6
|
6746-17/7RI
|
RING*
|
32"
|
PVM-32
|
30
|
750W
|
115V
|
279503-0001
|
7/512 -4/9D
|
PLATEN
|
32"
|
PVM-32
|
30
|
750W
|
230V
|
279503-0002
|
7/523 -4/9D
|
PLATEN
|
35", 48"
|
PMC-32C, -48C
|
INNER
|
8930W
|
230V
|
269217-5
|
8923-23/9RI
|
RING*
|
35", 48"
|
PMC-32C, -48C
|
INNER
|
8930W
|
460V
|
269217-1/3
|
8946-23/9RI
|
RING*
|
35", 48"
|
PMC-32C, -48C
|
OUTER
|
11350W
|
230V
|
269217-6
|
11423-29/8RI
|
RING*
|
35", 48"
|
PMC-32C, -48C
|
OUTER
|
11350W
|
460V
|
269217-2/4
|
11446-29/8RI
|
RING*
|
ALL SIZES
|
VARIOUS
|
ALL TYPE
|
AS REQUIRED
|
CUSTOM
|
ALL TYPES
|
||
* Use Diff-Tranz High Temperature Heat Transfer Compound |
Cooke Vacuum
Diff-Therm Platen Heaters are designed as direct replacements for Cooke Vacuum Diffusion Pump heaters.
Matching bolt patterns, casting shapes and sizes ensure ease of installation. Superior design and meticulous construction ensure uniform heating, longer life, and efficient power generation.
Dalton Diff-Therm heaters are built with high-purity magnesium oxide, nickel chromium resistance wire, and stainless steel internal components. Special filling methods and equipment compact the magnesium oxide tightly inside and around the resistor helix which is then swaged under 50 tons of pressure to its maximum possible density. The result is very high dielectric strength and efficient internal heat generation. Diff-Therm castings are machined to a smooth, flat finish to ensure efficient and uniform heat conduction into the boiler plate assembly for steady vaporization of the pump fluid.
To order a replacement heater, select the Dalton Diff-Therm heater below that matches your Cooke equipment.
Heater Replacement Guide: Cooke Vacuum Products | |||||||
PUMP
SIZE |
PUMP
MODEL |
Heaters
per Pump |
Electrical Rating
|
COOKE VACUUM
PART NO. |
DALTON
PART NO. |
HEATER
TYPE |
|
WATTS
|
VOLTS
|
||||||
4"
|
DPD-4-1250
|
1
|
1350W
|
115V
|
621-04
|
1412-5/5D
|
PLATEN
|
4"
|
DPD-4-1250
|
1
|
1350W
|
230V
|
622-04
|
1423-5/5D
|
PLATEN
|
6"
|
DPD-6-2400
|
1
|
2150W
|
230V
|
622-06
|
2223-7/3D
|
PLATEN
|
ALL SIZES
|
VARIOUS
|
1
|
AS REQUIRED
|
CUSTOM
|
CUSTOM
|
PLATEN
|
Edwards High Vacuum
Diff-Therm Platen Heaters are designed as direct replacements for Edwards High Vacuum Diffusion Pump heaters.
Matching bolt patterns, casting shapes and sizes ensure ease of installation. Superior design and meticulous construction ensure uniform heating, longer life, and efficient power generation.
Dalton Diff-Therm heaters are built with high-purity magnesium oxide, nickel chromium resistance wire, and stainless steel internal components. Special filling methods and equipment compact the magnesium oxide tightly inside and around the resistor helix which is then swaged under 50 tons of pressure to its maximum possible density. The result is very high dielectric strength and efficient internal heat generation. Diff-Therm castings are machined to a smooth, flat finish to ensure efficient and uniform heat conduction into the boiler plate assembly for steady vaporization of the pump fluid.
To order a replacement heater, select the Dalton Diff-Therm heater below that matches your Edwards High Vacuum equipment.
Heater Replacement Guide: EDWARDS HIGH VACUUM | |||||||
PUMP
SIZE |
PUMP
MODEL |
Heaters
per Pump |
Electrical Rating
|
EDWARDS HEATER NO.
|
DALTON
PART NO. |
HEATER
TYPE |
|
WATTS
|
VOLTS
|
||||||
4"
|
SI100
|
1
|
250W
|
120V
|
D5C067-2563
|
CARTRIDGE
|
|
4"
|
E04
|
1
|
850W
|
120V
|
H017-00-140
|
8/512-4D
|
PLATEN
|
4"
|
E04
|
1
|
850W
|
240V
|
H017-00-137
|
8/524-4D
|
PLATEN
|
6"
|
E06
|
1
|
1350W
|
120V
|
H017-00-59 & 102
|
1412-4/9D
|
PLATEN
|
6"
|
E06
|
1
|
1350W
|
240V
|
H017-00-54 & 113
|
1424-4/9D
|
PLATEN
|
9"
|
E09
|
1
|
2250W
|
120V
|
H017-00-161 & 132
|
2312-6/9D
|
PLATEN
|
9"
|
E09
|
1
|
2250W
|
240V
|
H017-00-158 & 137
|
2324-6/9D
|
PLATEN
|
10"
|
HT10
|
3
|
1700W
|
220V
|
26906-016
|
1722-6DE
|
PLATEN
|
10"
|
HT10
|
3
|
1700W
|
460V
|
26906-013
|
1746-6DE
|
PLATEN
|
12"
|
E012
|
3
|
1600W
|
120V
|
H017-00-181 & 102
|
1612-6E
|
PLATEN
|
12"
|
E012
|
3
|
1600W
|
240V
|
H017-00-179 & 113
|
1624-6E
|
PLATEN
|
16"
|
HT16
|
6
|
1500W
|
220V
|
26906-023
|
1522-6DE
|
PLATEN
|
16"
|
HT16
|
6
|
1500W
|
460V
|
26906-019
|
1546-6DE
|
PLATEN
|
18"
|
18B4
|
3
|
2000W
|
220V
|
26906-026
|
2022-6DE
|
PLATEN
|
18"
|
18B4
|
3
|
2000W
|
460V
|
26906-030
|
2046-6DE
|
PLATEN
|
20"
|
HT20
|
6
|
2100W
|
220V
|
26906-033
|
2122-10RE
|
PLATEN
|
20"
|
HT20
|
6
|
2100W
|
460V
|
26906-037
|
2146-10RE
|
PLATEN
|
Leybold
Watt-Flex® Cartridge Heaters are designed as direct replacements for Leybold Diffusion Pump Heaters.
The split sheath heater is designed for easy insertion into the heater tube at the base of the Leybold pump. The heater can be provided with or without the mounting bracket used to secure the heater in place.
When energized, the heater legs expand bi-laterally, making contact with the bore to maximize heat transfer to the heater tube and into the diffusion oil. When de-energized, the cartridge heater contracts for easy removal from the bore, eliminating drill outs, damage to the bore, and costly down-time.
Watt-Flex Cartridge heaters can be specially manufactured in 200 or 270 volt. To order a replacement heater, select the Dalton Watt-Flex heater below that matches your Leybold Vacuum Diffusion Pump.
Heater Replacement Guide: Leybold Vacuum Diffusion Pumps | |||||||
PUMP
SIZE |
PUMP
MODEL |
Heaters
per Pump |
Electrical Rating
|
LEYBOLD
PART NO. |
DALTON
PART NO. |
HEATER
TYPE |
|
WATTS
|
VOLTS
|
||||||
10"
|
DIP 3 000
|
2
|
1250W
|
230V
|
200 05 457
|
D9C200-2762
|
CARTRIDGE
|
16"
|
DIP 8 000
|
6
|
800W
|
230V
|
200 05 458
|
D9C200-2761
|
CARTRIDGE
|
20"
|
DIP 12 000
|
9
|
800W
|
230V
|
200 05 458
|
D9C200-2761
|
CARTRIDGE
|
26"
|
DIP 20 000
|
12
|
1000W
|
230V
|
200 05 459
|
D9C200-2760
|
CARTRIDGE
|
32"
|
DIP 30 000
|
18
|
1000W
|
230V
|
200 05 459
|
D9C200-2760
|
CARTRIDGE
|
39"
|
DIP 50 000
|
24
|
1000W
|
230V
|
200 05 459
|
D9C200-2760
|
CARTRIDGE
|
Torr Scientific
Diff-Therm Platen Heaters are designed as direct replacements for Torr Vacuum Diffusion Pump heaters.
Matching bolt patterns, casting shapes and sizes ensure ease of installation. Superior design and meticulous construction ensure uniform heating, longer life, and efficient power generation.
Dalton Diff-Therm heaters are built with high-purity magnesium oxide, nickel chromium resistance wire, and stainless steel internal components. Special filling methods and equipment compact the magnesium oxide tightly inside and around the resistor helix which is then swaged under 50 tons of pressure to its maximum possible density. The result is very high dielectric strength and efficient internal heat generation. Diff-Therm castings are machined to a smooth, flat finish to ensure efficient and uniform heat conduction into the boiler plate assembly for steady vaporization of the pump fluid.
To order a replacement heater, select the Dalton Diff-Therm heater below that matches your Torr equipment.
|
Varian/NRC
Dalton's Diff-Therm Platen Heaters are designed as direct replacements for Varian/NRC Vacuum Diffusion Pump Heaters.
Matching bolt patterns, casting shapes and sizes ensure ease of installation. Superior design and meticulous construction ensure uniform heating, longer life, and efficient power generation.
Dalton Diff-Therm heaters are built with high-purity magnesium oxide, nickel chromium resistance wire, and stainless steel internal components. Special filling methods and equipment compact the magnesium oxide tightly inside and around the resistor helix which is then swaged under 50 tons of pressure to its maximum possible density. The result is very high dielectric strength and efficient internal heat generation. Diff-Therm castings are machined to a smooth, flat finish to ensure efficient and uniform heat conduction into the boiler plate assembly for steady vaporization of the pump fluid.
To order a replacement heater, select the Dalton Diff-Therm heater below that matches your Varian equipment.
Heater Replacement Guide: VARIAN / NRC | |||||||
PUMP
SIZE |
PUMP
MODEL |
Heaters
per Pump |
Electrical Rating
|
VARIAN/NRC
HEATER NO. |
DALTON
PART NO. |
HEATER
TYPE |
|
WATTS
|
VOLTS
|
||||||
2"
|
HSA
|
1
|
350W
|
120V
|
0181-6473-01-100
|
W5C030-0117
|
CARTR.
|
2"
|
HS-2
|
1
|
450W
|
120V
|
0181-6473-02-125
|
W5C033-0118
|
CARTR.
|
2"
|
M-2
|
1
|
450W
|
120V
|
0181-6472-03-120
|
4/512-2/9D
|
PLATEN
|
4"
|
H4X,
VHS-4 |
1
|
1450W
|
120V
|
0181-6473-04-205
|
1512-4/9D
|
PLATEN
|
4"
|
H4X,
VHS-4 |
1
|
1450W
|
208V
|
0181-6473-210
|
1521-4/9D
|
PLATEN
|
4"
|
H4X,
VHS-4 |
1
|
1450W
|
240V
|
0181-6473-04-250
|
1524-4/9D
|
PLATEN
|
4"
|
M-4,
NHS-4 |
1
|
1190W
|
120
|
0181-6473-04-100
|
1212-4/9D
|
PLATEN
|
4"
|
M-4,
NHS-4 |
1
|
1190W
|
240
|
0181-6473-04-200
|
1224-4/9D
|
PLATEN
|
4"
|
VARIOUS
|
1
|
AS REQUIRED
|
--
|
CUSTOM 4/9D
|
PLATEN
|
|
4"
|
HS4/0161 |
1
|
1000W
|
120V
|
0181-6473-04-004
|
1012-5/D
|
PLATEN
|
4"
|
VARIOUS
|
1
|
AS REQUIRED
|
--
|
CUSTOM 5D
|
PLATEN
|
|
6"
|
VHS-6,
VS250 |
1
|
2200W
|
120V
|
0181-6473-06-125
|
2212-6D
|
PLATEN
|
6"
|
VHS-6,
VHS250 |
1
|
2200W
|
208V
|
0181-6473-06-175
|
2221-6D
|
PLATEN
|
6"
|
VHS-6,
VHS250 |
1
|
2200W
|
240V
|
0181-6473-06-225
|
2224-6D
|
PLATEN
|
6"
|
VHS-6,
VHS250 |
1
|
2200W
|
480V
|
NOT LISTED
|
2248-6D
|
PLATEN
|
6"
|
M-6,
NHS-6 |
1
|
1785W
|
120V
|
0181-6473-06-100
|
1812-6D
|
PLATEN
|
6"
|
M-6,
NHS-6 |
1
|
1500W
|
208V
|
0181-6473-06-150
|
1521-6D
|
PLATEN
|
6"
|
M-6,
NHS-6 |
1
|
1785W
|
240V
|
0181-6473-06-200
|
1824-6D
|
PLATEN
|
6"
|
VARIOUS
|
1
|
AS REQUIRED
|
CUSTOM 6D
|
PLATEN
|
||
6"
|
HS6/0162
|
1
|
1800W
|
120V
|
0181-6473-01-005
|
1812-7D
|
PLATEN
|
6"
|
HS6/0162
|
1
|
1800W
|
240V
|
0181-6473-01-006
|
1824-7D
|
PLATEN
|
6"
|
VARIOUS
|
1
|
AS REQUIRED
|
CUSTOM 7D
|
PLATEN
|
||
10"
|
HS-10
|
1
|
3900W
|
208V
|
NOT LISTED
|
3921-11D
|
PLATEN
|
10"
|
HS-10
|
1
|
3900W
|
240V
|
NOT LISTED
|
3924-11D
|
PLATEN
|
10"
|
HS-10
|
1
|
3900W
|
480V
|
NOT LISTED
|
3948-11D
|
PLATEN
|
10"
|
HS-10
|
1
|
3300W
|
480V
|
0180-6473-10-230
|
3348-11D
|
PLATEN
|
10"
|
VARIOUS
|
1
|
AS REQUIRED
|
CUSTOM-11D
|
PLATEN
|
||
10"
|
VHS-10, VHS400
|
1
|
5000W
|
208V
|
NOT LISTED
|
5021-12D
|
PLATEN
|
10"
|
VHS-10, VHS400
|
1
|
5000W
|
240V
|
NOT LISTED
|
5024-12D
|
PLATEN
|
10"
|
VHS-10, VHS400
|
1
|
5000W
|
480V
|
NOT LISTED
|
5048-12D
|
PLATEN
|
10"
|
VHS-10, VHS400
|
1
|
4400W
|
208V
|
0181-6473-10-140 (x2)
|
4421-12D
|
PLATEN
|
10"
|
VHS-10, VHS400
|
1
|
4400W
|
240V
|
0181-6473-10-150 (x2)
|
4424-12D
|
PLATEN
|
10"
|
VHS-10, VHS400
|
1
|
4400W
|
480V
|
0181-6473-10-170 (x2)
|
4448-12D
|
PLATEN
|
10"
|
VARIOUS
|
1
|
AS REQUIRED
|
CUSTOM 12D
|
PLATEN
|
||
16"
|
HS-16
|
3
|
3200W
|
240V
|
NOT LISTED
|
3224-8R
|
PLATEN
|
16"
|
HS-16
|
3
|
3200W
|
480V
|
NOT LISTED
|
3248-8R
|
PLATEN
|
16"
|
HS-16
|
3
|
2700W
|
240V
|
0181-6473-16-035
|
2724-8R
|
PLATEN
|
16"
|
HS-16
|
3
|
2700W
|
480V
|
0181-6473-16-045
|
2748-8R
|
PLATEN
|
16"
|
VARIOUS
|
3
|
AS REQUIRED
|
CUSTOM 8R
|
PLATEN
|
||
20"
|
HS-20
|
6
|
2400W
|
240V
|
NOT LISTED
|
2424-10R
|
PLATEN
|
20"
|
HS-20
|
6
|
2400W
|
480V
|
NOT LISTED
|
2448-10R
|
PLATEN
|
20"
|
HS-20
|
6
|
2000W
|
240V
|
0181-6473-20-060
|
2024-10R
|
PLATEN
|
20"
|
HS-20
|
6
|
2000W
|
480V
|
0181-6473-20-070
|
2048-10R
|
PLATEN
|
20"
|
HS-20
|
6
|
AS REQUIRED
|
CUSTOM 10R
|
PLATEN
|
||
32"
|
HS-32
|
6
|
4000W
|
240V
|
0181-6473-32-075
|
4024-14R
|
PLATEN
|
32"
|
HS-32
|
6
|
4000W
|
480V
|
0181-6473-32-075
|
4048-14R
|
PLATEN
|
32"
|
VARIOUS
|
6
|
AS REQUIRED
|
CUSTOM 14R
|
PLATEN
|
||
35"
|
NHS-35
|
6
|
4000W
|
240V
|
0181-6472-35-248
|
4024-16/8R
|
PLATEN
|
35"
|
NHS-35
|
6
|
4000W
|
480V
|
0181-6472-35-248
|
4048-16/8R
|
PLATEN
|
35"
|
VARIOUS
|
6
|
AS REQUIRED
|
CUSTOM16/8R
|
PLATEN
|
Veeco
Dalton Diff-Therm platen heaters are designed as direct replacements for Veeco Vacuum Diffusion Pump Heaters.
Matching bolt patterns, casting shapes and sizes ensure ease of installation. Superior design and meticulous construction ensure uniform heating, longer life, and efficient power generation.
Dalton Diff-Therm heaters are built with high-purity magnesium oxide, nickel chromium resistance wire, and stainless steel internal components. Special filling methods and equipment compact the magnesium oxide tightly inside and around the resistor helix which is then swaged under 50 tons of pressure to its maximum possible density. The result is very high dielectric strength and efficient internal heat generation. Diff-Therm castings are machined to a smooth, flat finish to ensure efficient and uniform heat conduction into the boiler plate assembly for steady vaporization of the pump fluid.
To order a replacement heater, select the Dalton Diff-Therm heater below number that matches your Veeco Vacuum Diffusion Pump Equipment.
Heater Replacement Guide: VEECO Vacuum Diffusion Pumps | |||||||
PUMP
SIZE |
PUMP
MODEL |
Heaters
per Pump |
Electrical Rating
|
VEECO
HEATER NO. |
DALTON
PART NO. |
HEATER
TYPE |
|
WATTS
|
VOLTS
|
||||||
3"
|
300 Series
|
1
|
350W
|
115V
|
1180-030-00
|
3/512-3/3D
|
PLATEN
|
6"
|
7700 Series
|
1
|
1800W
|
208V
|
1180-220-00
|
1821-6D
|
PLATEN
|
6"
|
7760 Series
|
1
|
1800W
|
208V
|
1180-220-00
|
1821-6D
|
PLATEN
|
10"
|
747 Series
|
1
|
1800W
|
208V
|
1180-220-00
|
1821-6D
|
PLATEN
|